Understand your network.
Track pressure and water temperature at selected points to build a clearer picture of operating conditions.
Pressure + water temperature
Know your pressure.
See the bigger picture.
Bring water pressure and temperature into your monitoring system. One compact sensor, with wireless BLE and wired CAN FD connectivity.
Security built in.
Encrypted BLE · Verifiable device identity · Signed firmware updates
Explore security & our CRA approachBuilt to connect. Designed around your water system.
- Pressure range
- 0–16 bar
- Pressure accuracy
- ±0.1 bar
- Connectivity
- BLE + CAN FD
- Measurements
- Pressure + water temperature
Meet the sensor
A clearer view of
what’s happening.
Pressure and water temperature tell you more together. Capture both at the measurement point and bring the readings into the application you already use.
Explore the specification- 01
Two readings. One device.
Measure pressure and water temperature together, with a dedicated probe extending into the water.
- 02
Connect your way.
Choose BLE for wireless data or CAN FD for wired integration. Adjustable reporting lets you match readings to your application.
- 03
Confidence built in.
Stored calibration supports consistent measurement. Encrypted BLE communication and signed device identity help protect your connections.
Where it fits
From the water system
to your next product.
A practical measurement point for monitoring, equipment development and connected water applications.
See how equipment behaves.
Bring pressure readings into pump and water-equipment monitoring, commissioning and evaluation.
Build it into your system.
Add pressure and temperature measurement to your application through documented digital interfaces.
Made for integration
Compact outside.
Considered throughout.
A G3/4 pressure connection brings the sensor to the water. A five-pin M12 connector supplies power and carries CAN FD data, while BLE gives you a wireless data path.
- Pressure connectionG3/4-14 B male parallel thread
- Electrical connectionFive-pin, A-coded M12 male
- Sensor body40 mm diameter · 126 mm overall length
Connect the measurement
Your sensor.
Your application.
Take readings into a PC application, connect through an EMD Utility gateway, or integrate over CAN FD.
MeasurePressure sensorPressure + water temperature
BLE
Data
UseYour applicationMonitor · record · analyse
BLE, ready for integration.
Read pressure and water temperature, adjust reporting and access calibration through the BLE services. The datasheet includes the service map and data format for developers.
Bring sensors together.
The EMD Utility gateway receives sensor readings over BLE and passes them to a connected application. Talk to us about the right gateway arrangement for your installation.
CAN FD connectivity.
Use the M12 electrical connection for a wired data path alongside power. Discuss your CAN integration requirements with our team.
Security & cyber resilience
Trust the connection.
Verify the device.
Protection for your readings, confidence in sensor identity and control over firmware updates. Security is part of the product from connection to production.
Encrypted BLE communication.
Bluetooth LE Secure Connections pairing and 128-bit link encryption protect measurement and configuration communication.
Signed device identity.
Provisioned sensors carry a signed device credential. A fresh challenge lets a compatible receiver verify the sensor’s identity and possession of its device key.
Signed firmware updates.
Compatible firmware checks signed images before accepting an update. Updates use an encrypted BLE connection, helping protect the software running on the sensor.
Traceable manufacturing.
Manufacturing records link each unit to its firmware, configuration, calibration and provisioned identity, supporting commissioning and service.
EU Cyber Resilience Act
Working towards CRA conformity.
Our security architecture and traceable release process provide a foundation for the EU Cyber Resilience Act (CRA). Our compliance roadmap covers product risk assessment, vulnerability handling, security support information and conformity documentation.
Device identity verification uses provisioned units and compatible receivers. Signed updates depend on the supplied firmware. Discuss the security configuration and compliance requirements for your application with our team.
The essentials
The detail
behind the data.
One sensor configuration, with the key information in one place. Full interface tables and the engineering drawing are in the datasheet.
Download full datasheet
| Pressure range | 0–16 bar |
|---|---|
| Complete-sensor accuracy | ±0.1 bar |
| Measurements | Pressure and water temperature |
| Data interfaces | Bluetooth Low Energy (BLE) and CAN FD |
| Supply voltage | 5.0 V DC nominal 4.5–5.5 V DC operating range |
| Supply current Provisional | 17.5 mA peak · 30 µA idle |
| Pressure fitting | G3/4-14 B male parallel thread |
| Sensor connector | Five-pin, A-coded M12 male |
| Matching cable connector | Five-pin, A-coded M12 female Example: Phoenix Contact 1662968 |
| Overall size | 126 mm long × 40 mm body diameter |
Current figures are provisional. Actual consumption depends on the operating mode and reporting settings. See the datasheet for measurement details and connection information.
Take a closer look
Everything starts with the detail.
Pressure sensor datasheet
Specifications, mechanical drawing, connector pinout and BLE interface reference.
PDF documentNeed help choosing a connection or planning integration? Ask our team
A few useful answers
Before you
connect.
Is the sensor completely wireless?
BLE carries data wirelessly. The sensor still needs an external regulated DC supply through its M12 connector: 5 V nominal, within the 4.5–5.5 V operating range.
Does it measure water temperature?
Yes. A dedicated probe extends into the water and measures water temperature alongside pressure.
How do I receive the readings?
Use a compatible BLE receiver with your PC application, an EMD Utility gateway, or a wired CAN FD connection. The datasheet documents the BLE services and reading format; contact us to discuss your setup.
Which cable connector do I need?
A five-pin, A-coded M12 female cable connector mates with the sensor’s male connector. Phoenix Contact 1662968 is one example, with screw terminals for a 4–6 mm cable. Follow the sensor pinout in the datasheet when wiring it.
Which pressure range is available?
The current sensor measures 0–16 bar with complete-sensor accuracy within ±0.1 bar. Tell us about your application so we can help you check the fit.
Make the connection
Let’s talk pressure.
Tell us what you need to measure and where you want the data to go.
Sales representative · EMEA
Geoff Haswell
Europe, the Middle East and Africa